Dealing with a plumbing problem in your Henderson, Kentucky, home is never a fun experience. One of the most frustrating issues that can arise is a failing water heater. It can cause a flood in the area of your house where the unit is stored, as well as leave your family without hot water until it’s replaced. Keep an eye out for some of the most common signs of water heater failure so you know when you need to upgrade your unit.
A rumbling sound often means that the pressure is too high, which can damage the water heater and the pipes that are connected to the water heater. Another warning sign of excess pressure is water leaking from the overflow pipe located on the side of the water heater, which is often installed over the top of a floor drain.
If your water is muddy, discolored, or rusty looking, this problem indicates some corrosion within the tank. A water heater needs air to operate properly, so a lack of airflow or dirty air can lead to problems that cause the tank to corrode. Rust from the rod in your water heater can also lead to discoloration in the water, as well as minerals found in hard water. If your tank has started to corrode, it will most likely need to be replaced.
Cold or Warm Water
One of the most telltale signs of a water heater failure is cold water coming through the faucets. Be sure to test the faucets in other areas of the house, as a tap can go bad and doesn’t necessarily impact the water heater. If all the water is cold, you likely need a new water heater. Without warm water, you can’t take comfortable showers, clean dishes, or even run a washing machine.
If you experience any of these water heater warning signs, contact Ontime Service today.
Image provided by Shutterstock