Because a heat pump operates differently in the winter than it would in the summer, a few steps can assure maximum efficiency and comfort. Learn the fundamentals of winter heat pump usage to cut costs on your energy bill and extend the life of your system. Here’s how to use your heat pump efficiently during winter in Owensboro, KY.
1. Replace Your Heat Pump Filters
Change your dirty air filters at least once every three months. If you own pets or your house has a lot of dust, you may need to check them monthly and change them as needed.
This is especially the case if you suffer from asthma or allergies. A clean filter increases both your energy efficiency and the quality of your indoor air.
2. Insulate Your House
You would like the heat generated by your system to remain inside your home. Some heat might escape via cracks around doors and windows if you don’t adequately seal your home. Examine your home for any spots where warm air might escape.
Many homeowners easily add weather-stripping under doors and windows. Make sure you have enough insulation in your attic to contain the heat i your home. Over time, insulation compacts and becomes less effective, so checking every few years is a good idea.
3. Set Your Thermostat Properly
A smart thermostat is among the most useful instruments when you need to successfully regulate your Owensboro, KY, heat pump. You should never adjust your thermostat to a high temperature in order to get your ideal temperature. Setting the thermostat to 90 degrees Fahrenheit will not speed up the process of reaching 70 degrees Fahrenheit.
It may, however, reduce your system’s energy efficiency and place additional strain on it. A programmable thermostat will switch on the heat pump ahead of the time you’ve set for temperature adjustment, ensuring that you get the warmth you need when you need it.
Contact us at OnTIME Service if you require heat pump repair services or for any HVAC system need for your Owensboro, KY, home.
Image provided by iStock